skip to Main Content

When not able to access Setup

Chat with our expert’s to get a solution

If  you are trying to install your wifi range extender by and you are not able to complete the setup process at that time you can get in touch with our expert’s who will help you to install your wifi extender. Netgear


  1. First, unbox your extender and connect to the power.
    Then the user has only one green power light
  2. If you get it is not serving, press the on/off button of the extender.
  3. Now you have to check your home network is turned On and working properly
  4. Now you need a wifi enabled device to join extender network
    then user have to open the web browser.
  5. You have to write or the IP address is
  6. Then you have to apply the username and the password as the admin.
  7. Now you will see the genie setup wizard on the screen.
    by following this Genie setup you have to select your regular wifi and hit next

Then put the same password as you use for your router.Now it will start applying the setting which can take 2-3 min
when your extender connected to the router it show 3 lights on it, that means now you can use your extender.


  • At first, uncover the packet of the newly bought range extender.
  • The user has to place the extender near to the router.
  • Then you have to make sure the power supply for the booster.
  • If it does not get the power supply, you have to hold the on/off button of the repeater.
  • You have to search the WPS button on the extender and the router.
  • Then press the WPS button on the extender and the router.
  • Then you will see Light begins flashing.
  • Now you have to wait for few seconds.
    Then it will start to programing the settings After completing the whole process, you can use an extender at your desired location.
Netgear WN3000RP setup
Back To Top